M15G SERIES

Pocket

Feature

Internal sliding parts extremely slippery by the hard-anodized, stick-slip has excellent abrasion resistance in operation can not operate even without lubrication.

The main parts are made of aluminum alloy, has become very small and light.

You can be easily replaced AC, DC coil is designed so that both fit into the same casing.

Corrosion treatment has been applied in a very strong hard anodized corrosion resistant.

Flameproof is a test of the Ministry of acceptable product.

Main valve is not malfunction due to spring for actuation by a piston, without the need for a spring, also be left for a long period of time and therefore will operate 換作 off balance spool type.

With buttons for manual, you can check or test operation.

Minimum operating pressure is 0.1MPa operate reliably in because there is no Earosu.

You can also be used as a three-way valve to select the port in the form of port 5.

Standard specification

FLUID
CLEAN AIR
FLUID TEMPERATURE
-20 ~ 60℃
AMBIENT TEMPERATURE
-20 ~ 60℃
DUTY CYCLE
100% CONTINUOUSLY RATED
OPERATING VOLTAGE RANGE
+10,-15%
WORKING PRESSURE
0.1 ~ 0.99MPa
Cv. FLOW FACTOR
0.87
STANDARD VOLTAGE
See below

STANDARD VOLTAGE

AC DC
V/Hz INRUSH A HOLDING A V A
GENERAL PURPOSE TYPE 12PG, EXPLOSION-PROOF TYPE E12PU COIL INSULATION CLASS:H
100/50 0.27 0.16 24 0.33
100/60 0.25 0.13 48 0.15
110/60 0.25 0.15 100 0.072
200/50 0.14 0.08 110 0.08
200/60 0.13 0.07 125 0.06
220/60 0.13 0.08

Product Image

M15G GENERAL PURPOSE TYPE

M15G-8~10 GENERAL PURPOSE TYPE
NOMINAL DIAMETER MOUNTING LENGTH H
8 60 123
10 60 123

M15G EXPLOSION-PROOF TYPE

M15G-8~10 EXPLOSION-PROOF TYPE
NOMINAL DIAMETER MOUNTING LENGTH H
8 60 138
10 60 138

M15G HYDROGEN EXPLOSION-PROOF TYPE

M15G-8~10 HYDROGEN EXPLOSION-PROOF TYPE
NOMINAL DIAMETER MOUNTING LENGTH H
8 60 156
10 60 156

M15G DUST EXPLOSION-PROOF TYPE

M15G-8~10 DUST EXPLOSION-PROOF TYPE
NOMINAL DIAMETER MOUNTING LENGTH H
8 60 190
10 60 190

DESCRIPTION OF OPERATION

Download